Skip to contentBuilt for the next shift.Explore OpenHandover’s early access

Guide

Pub cellar management: the daily and weekly routine

Daily: temperature and safety

Read the cellar thermometer at the same time every day, usually at opening, so readings can be compared. Many pubs keep their cellar between 11°C and 13°C for cask beer; use the range your brewer or supplier recommends. A reading out of range needs an action and a note: a door left open, a cooler fault, or an engineer called.

  • Cellar temperature read and recorded.
  • Gas cylinders chained and secure, never free-standing.
  • Floor clear and dry, with nothing to trip over on the steps.

The cellar checklist covers all three in about ten minutes.

Line cleaning

Clean lines on the schedule your cleaning product and supplier recommend, often weekly. Record each clean step by step: taps marked out of use, lines flushed with water, cleaner left for the stated time, flushed again until clear, and the beer tasted afterwards. The beer line cleaning checklist follows that order.

Line cleaner is a chemical. Wear gloves and eye protection, tell the bar team before you start, and put a sign on the taps.

Stock and rotation

Put new deliveries behind older stock so the oldest is used first, and check dates as you go. Follow your brewer’s guidance on how long cask beer needs to settle before it goes on sale and how long it lasts once it is on.

Gas safety

Follow your gas supplier’s safety guidance and training. Keep cylinders secured and the cellar ventilated, and if a gas alarm is fitted, check that it is working as part of your routine.

Record it so the next person knows

Whoever opens tomorrow needs to know the state of the cellar without going down to check everything again: when the lines were last cleaned, whether the cooler is behaving, what is running low. That only works if each check is recorded with who did it and when.

When something goes wrong

A cooler that keeps tripping or a line that will not clear is not a note for the handover; it is a job that needs an owner and a next step until it is fixed. Otherwise it gets mentioned at every shift change and fixed at none.

Free templates for this

Every shift starts knowing what is still open.

OpenHandover keeps checks, issues and handovers together, so the next shift always knows what is still open, who owns it and what happens next.

Get started with OpenHandover