Skip to contentBuilt for the next shift.Explore OpenHandover’s early access

Cleaning · Free template

Fryer cleaning checklist

A step-by-step fryer deep cleaning checklist: make it safe, check the oil has cooled, drain and clean, boil-out if your fryer allows it, refill and test.

When
As often as your fryer and menu need, often weekly. Plan about 45 minutes.
Who
A trained member of the kitchen team.
Repeats
When needed · about 45 minutes
Use it in OpenHandover

Fryer cleaning is one of the more dangerous routine jobs in a kitchen because it involves hot oil. This checklist puts safety first: switch off and isolate, then record the oil temperature before anyone drains it.

After that it follows the order most fryers need: drain into a safe container, clean the baskets, lid and vat, boil-out if your model allows it, then refill and check it heats normally. A photo of the clean fryer at the end shows it was done.

The checklist

  1. Make it safeSwitch off and isolate. Never drain hot oil: wait until it is below 40°C.
  2. Fryer switched off and isolated
  3. Oil temperature before drainingTarget: 40°C or below
  4. Drain and clean
  5. Oil drained into a safe container
  6. Baskets, lids and vat cleaned
  7. Boil-out if your fryer allows itFollow the maker’s instructions for the cleaning solution.
  8. Rinsed and dried
  9. Refill and test
  10. Fresh oil filled to the line
  11. Fryer heats up normally? Yes NoNo means a problem
  12. If “Fryer heats up normally?” is No:What happened?
  13. Photo of the clean fryer Photo in the app

This is the same template OpenHandover teams start from. Edit it to match your own procedures.

Getting it right

  • Never drain hot oil. This template asks for a reading below 40°C first.
  • Follow the fryer maker’s instructions for boil-out solutions.
  • If the fryer does not heat normally after refilling, record what happened and raise it before service.

Using it in OpenHandover

In OpenHandover the fryer clean can be planned as a task for a named person with a planned start and finish, so you can see when it was actually done against when it was planned.

Run it every day, not just print it.

OpenHandover puts this check on your team’s Today screen at the right time, records who did it, and turns a problem into an issue with an owner.

Get started with OpenHandover