Guide
Fridge temperature records: what to write down and what to do when a reading is out
This guide is about keeping useful records. It is not food safety advice for your business: your targets, frequencies and actions should come from your own food safety plan. The Food Standards Agency’s Safer Food, Better Business pack is the place to start if you do not have one.
Why the record matters
A temperature record does two jobs. Day to day, it catches a fridge that is starting to fail before food is lost. Over time, it shows that your kitchen notices problems and deals with them. The second job depends almost entirely on what happens when a reading is wrong.
How often to take readings
Pick set times and stick to them, so readings are comparable from day to day. Many kitchens read at opening and again in the afternoon, which is what our fridge temperature log starts with. Your plan may ask for more.
Taking a reading you can trust
- Avoid reading straight after a delivery or a busy spell with the door open. If the reading is high, close the door, wait and read again before acting on it.
- Know what you are reading: the display on the unit, a fridge thermometer or a probe in a food simulant. Use the same method each time.
- If you use a probe, keep it clean and check it is working as your plan says.
- Write the figure, not a tick.
When a reading is out of range
This is where a record earns its keep. A useful entry for an out-of-range reading says what you found, what you did and who is following it up:
Fridge 2: 9°C at 7.10am. Door had been left ajar overnight.
Food checked and dealt with as our plan says; moved what we kept to fridge 1.
Re-read at 8.00am: 4°C. Door seal checked and working.
No engineer needed. Reminder added to the closing checklist.
If the unit keeps failing, it needs an owner and an engineer, not another note. Treat it as a piece of work with a next action due, so the next shift can see whether the engineer has been called.
Targets
Our template flags a fridge above 5°C and a freezer above −18°C, because those are common starting points. They are not rules for your business. Set the targets your food safety plan uses, for each unit you have.
Paper sheets or an app?
A paper sheet on the fridge door works if someone fills it in at the right times and someone else reads it. What a digital record adds is that a reading is checked against its target as it is entered, an out-of-range reading asks what was done before the check can be finished, and a reading that was not taken can alert the people responsible instead of leaving a blank.